Panasonic AJ-PX800G, Operating Instructions Manual

Page: 22 / 220

– 22 –
Chapter 2 Description of parts — Menu operation section and thumbnail operation section
Menu operation section and thumbnail operation section
2 1
3 4 5 6 7
1 Jog dial button (page 119)
f
When the setting menu is displayed, navigate through the setting menu pages to select and set items. Turning the jog dial button toward the bottom
moves the cursor toward the bottom. Turning it toward the top moves the cursor toward the top. Press the jog dial button to fix the settings.
f
When the setting menu is not displayed, the following operation allows you to adjust the synchro scan speed. Press the <SHUTTER> switch from
the <ON> position towards the <SEL> side several times to display the shutter speed in highlight and adjust using the jog dial button in synchro
scan mode. (page 58)
2 <MENU> button (page 119)
Press this button to display [USER MENU]. Press this button for 3 seconds or more to display the main menu. Press it again to return to the original
image.
During recording, button operation is disabled.
This button functions in the same way as the <THUMBNAIL MENU> button.
3 <THUMBNAIL> button (page 102)
Press the button to display the thumbnail screen on the viewfinder and the monitor screen connected to the camera. Button operations are disabled
during recording and playback.
4 <EXIT>/<CANCEL> buttons (pages 104, 119)
Restore the display to the previous state while the setting menu or property screen is displayed.
Press this button while holding down the <SHIFT> button to act as the cancel button. This is convenient, for example, for batch-canceling clip
selections.
5 Cursor/<SET> button (pages 104, 119)
Operate the setting menu and thumbnails.
The four triangular buttons are cursor buttons and the square button in the center is the <SET> button.
6 <THUMBNAIL MENU> button
Press this button to display [USER MENU]. Press this button for three seconds or more to display the main menu. Press it again to return to the
original image.
During recording, button operation is disabled.
This button functions in the same way as the <MENU> button.
@ @ NOTE
t
Use the cursor/<SET> button and the <EXIT>/<CANCEL> buttons to select thumbnails or operate menus. (page 104)
7 <SHIFT> button (pages 104, 119)
Use this button while using other buttons at the same time. Operations with the <SHIFT> button held down are displayed in orange at the bottom of
each button.
f
Press the cursor button (
`
/
{
) while holding down the <SHIFT> button.
This moves the cursor to the thumbnail of the clip at the start or the end on the thumbnail screen.
f
Press the <SET> button while holding down the <SHIFT> button
This selects all clips from the previously selected clip up to the clip at the cursor position.
f
Press the <EXIT>/<CANCEL> buttons while holding down the <SHIFT> button.
This works as the cancelation function.