Panasonic AJ-PX800G, Operating Instructions Manual

Page: 41 / 220

– 41 –
Chapter 3 Preparation — Setting the date/time of the internal clock
Setting the date/time of the internal clock
The value of the time is recorded to content (clips) and affects the thumbnail playback order. Before recording, be sure to check and set the date and
time zone.
1
Press the <MENU> button for 3 seconds or more.
f
The main menu screen is displayed in the viewfinder.
2
Select the main menu → [OTHER FUNCTIONS] → [CLOCK SETTING] to set the year, month, day, and time.
For details on the settings menu, refer to “Setting menu basic operations” (page 119).
3
Select the main menu → [OTHER FUNCTIONS] → [TIME ZONE] to set the time difference from Greenwich Mean Time.
r
Time zone table
Time difference Region Time difference Region
00:00 Greenwich + 01:00 Central Europe
− 00:30 + 01:30
− 01:00 Azores + 02:00 Eastern Europe
− 01:30 + 02:30
− 02:00 Mid-Atlantic + 03:00 Moscow
− 02:30 + 03:30 Tehran
− 03:00 Buenos Aires + 04:00 Abu Dhabi
− 03:30 Newfoundland + 04:30 Kabul
− 04:00 Halifax + 05:00 Islamabad
− 04:30 + 05:30 Bombay
− 05:00 New York + 06:00 Dakar
− 05:30 + 06:30 Yangon
− 06:00 Chicago + 07:00 Bangkok
− 06:30 + 07:30
− 07:00 Denver + 08:00 Beijing
− 07:30 + 08:30
− 08:00 Los Angeles + 09:00 Tokyo
− 08:30 + 09:30 Darwin
− 09:00 Alaska + 10:00 Guam
− 09:30 Marquesas Islands + 10:30 Lord Howe Island
− 10:00 Hawaii + 11:00 Solomon Islands
− 10:30 + 11:30 Norfolk Island
− 11:00 Midway Islands + 12:00 New Zealand
− 11:30 + 12:45 Chatham Islands
− 12:00 Kwajalein Atoll + 13:00
+ 00:30
@ @ NOTE
t
Be sure to make this setting before using the camera for the first time. After, do not change the setting during use.
t
Clock accuracy is a lunar inequality of approximately ±30 seconds with the power off. When accurate time is required, check and reset the time when
the power is turned on.
t
The built-in clock runs for several years on the built-in lithium cell of the camera. When the lithium cell runs low, will be displayed in the viewfinder
when the camera is turned on. For details, refer to “Maintenance” (page 202).