Panasonic AJ-PX800G Page 160 Operating Instructions Manual Download

Page: 160 / 220

– 160 –

Chapter 8 Display — Screen status display

[PROXY]

[MEDIA]

Displays the media selection status for proxy recording.

[P2]/[P2&SD]/[OFF]

[MODE]

Displays the setting status for proxy recording mode.

[AVC-G6 2CH MOV]/[SHQ 2CH MOV]/[HQ 2CH MOV]/[LOW 2CH MOV]

[PROXY ERROR]

Displays the operation error on the proxy module.

[NETWORK]

Displays the network to be used and its status.

[AUDIO] screen

Displays audio settings and the selection status of each recording channel.

[AUDIO]

[SAMPLE RES]

Displays the audio recording bits.

[A.IN]

[CH1/2/3/4]

Displays the input status of each channel.

[FRONT] (front), [REAR] (rear), [W.L.] (wireless)

[LEVEL]

[CH1/2/3/4]

Displays the recording level adjustment method currently selected on each channel.

[MANU]: Displayed when manual adjustment is set.

[AUTO]: Displayed when automatic adjustment is set.

Settings are performed in the SmartUI [AUD01:LEVEL] screen.

[F.VR]

[CH1/2/3/4]

Displays by [ON]/[OFF] whether the <F.AUDIO LEVEL> dial is enabled on the channel to

which [VR] (manual adjustment by adjustment dial) is displayed in [LEVEL].

[LIMITER]

[CH1/2/3/4]

Displays the limiter settings of each channel.

[LOWCUT]

[CH1/2/3/4]

Displays the lowcut filter status of each channel.

[METER]

[CH1/2/3/4]

Displays the recording level of each channel.

[USER SW] screen

Displays the assignment status of each USER button. For details, refer to “Assigning functions to USER buttons” (page 60).

[OTHER ASSIGN]

[GAIN L]

Displays the gain value assigned to <L> of the <GAIN> switch.

[GAIN M]

Displays the gain value assigned to <M> of the <GAIN> switch.

[GAIN H]

Displays the gain value assigned to <H> of the <GAIN> switch.

[S.GAIN]

Enumerates and displays the gain value assigned as super gain.

[WHITE BAL A]

Displays the color temperature assigned to <A> of the <WHITE BAL> switch.

[WHITE BAL B]

Displays the color temperature assigned to <B> of the <WHITE BAL> switch.

[WHITE BAL PRE]

Displays the color temperature assigned to <PRST> of the <WHITE BAL> switch.

[USER SW]

[USER M]

Displays the assignment to the <USER MAIN> button.

[USER 1]

Displays the assignment to the <USER1> button.

[USER 2]

Displays the assignment to the <USER2> button.

[RET SW]

Displays the assignment to the <RET> button on the lens.

[CAC INFO] screen

Display the operation status or information of CAC.

[CAC CONT]

Displays the operation status of CAC.

[ON]: [ON] has been set in the main menu

→

[MAINTENANCE]

→

[CAC ADJ.]

→

[CAC CONTROL] and CAC is active.

[STOP]: [ON] has been set in the main menu

→

[MAINTENANCE]

→

[CAC ADJ.]

→

[CAC CONTROL], however, CAC

operation stops under certain data or lens conditions.

[OFF]: [OFF] has been set in the main menu

→

[MAINTENANCE]

→

[CAC ADJ.]

→

[CAC CONTROL] and CAC is not

active.

[CAC MODE]

Displays the operation mode of CAC.

[AUTO]: The CAC file is automatically selected.

[CONNECT LENS TYPE]

Displays the lens ID of the currently connected digital lens.

[SELECT FILE TITLE]

Displays the title and the file version of the CAC file currently used in the operation. The CAC file can be set in the main menu

→

[MAINTENANCE]

→

[CAC ADJ.].

[CAC WARNING]

Displays a warning when operation of CAC has stopped.

[CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.

[LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.

[CAC FILE DATA NOT FOUND]: Displayed when the chromatic aberration compensation function is set to [ON] and the

chromatic aberration compensation data matching the connected lens.

Summary of Contents for AJ-PX800G





























































































































































































































Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands

Panasonic AJ-PX800G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands