– 60 –
Chapter 4 Shooting — Assigning functions to USER buttons
Assigning functions to USER buttons
Selected functions can be assigned to the <USER MAIN>, <USER1>, <USER2>, and lens <RET> buttons.
Set each function to be assigned in the main menu
→
[USER SW], [USER MAIN], [USER1], [USER2], [RET SW].
In the factory settings, [Y GET] is assigned to the <USER MAIN> button, [TEXT MEMO] to the <USER1> button, [LEVEL GAUGE] to the <USER2>
button, and [REC CHECK] to the <RET> button of the lens.
<USER MAIN>/<USER1>/<USER2> buttons
Selectable functions
The functions that can be assigned to the USER button are as follows:
Item
Description
[INHIBIT]
Disables assignment of functions.
[LEVEL GAUGE]
Assigns the function for switching the level gauge display function to enabled/disabled.
[LEVEL GAUGE
RESET]
Assigns the function to set the level gauge using the current horizontal and vertical directions as reference values. Holding down the
assigned button will reset to the factory setting.
[WFM]
Assigns the function for switching the waveform display of the waveform monitor. Select the waveform display from the main menu
→
[SW MODE]
→
[WFM MODE].
[D.ZOOM x2]
[D.ZOOM x4]
Assigns the digital zoom function.
Zooms in on the field angle by 2x/4x vertically and horizontally.
[DRS]
Assigns the function for switching the dynamic range stretcher function to enabled/disabled.
[FBC]
Assigns the function for switching the flash band compensation function to enabled/disabled.
[S.GAIN]
Assigns the function for switching the super gain function to enabled/disabled.
[ATW]
Assigns the function for switching the auto tracking white balance function to enabled/disabled.
[ATW LOCK]
Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto
tracking white balance function when pressing again.
[SPOTLIGHT]
Assigns the function for switching the auto iris control function for the spotlight to enabled/disabled.
[BACKLIGHT]
Assigns the function for switching the auto iris control for the backlight compensation to enabled/disabled.
[Y GET]
Assigns the function for displaying the brightness level of the frame area displayed near the center.
[PUSH AF]
Assigns the function to enable/disable the function to temporarily activate auto focus in the manual focus mode. Set the operation mode in
the main menu
→
[SW MODE]
→
[PUSH AF MODE].
[PRE REC]
Assigns the function for switching the pre-recording function to enabled/disabled.
[TEXT MEMO]
Assigns the text memo function.
[SHOT MARK]
Assigns the shot mark function.
[SLOT SEL]
Assigns the function for switching the card to record when two or more cards are inserted in the P2 memory card slot.
[AUDIO MON SEL]
Assigns the function for switching the output audio channel. If audio channel 1/2 is selected, every press of the assigned button switches
the channel between audio channel 1 monaural, audio channel 1 and 2 stereo, and audio channel 2 monaural. If audio channel 3/4 is
selected, every press of the assigned button switches the channel between audio channel 3 monaural, audio channel 3 and 4 stereo, and
audio channel 4 monaural.
[REC CHECK]
Assigns the recording check function.
[USB MODE]
Assigns the function for switching the USB device mode or USB host mode to enabled/disabled.
[PLAYLIST]
Assigns the function for switching the playlist edit mode to transfer/end.
[EVF COLOR]
Assigns the function for switching whether to display the viewfinder image in color or in black and white.
[REC DURING
UPLOAD]
Assigns the function for enabling/disabling the rec during upload function.
This setting is linked to the setting value in the main menu
→
[NETWORK SETUP]
→
[FTP CLIENT SERVICE]
→
[REC DURING
UPLOAD].
[UPLOAD LIST]
Assigns the function to display the upload list of the rec during upload function. To close the upload list, press the <EXIT> button.
[STREAMING
START]
Assigns the function for starting/stopping streaming from the camera.
This setting is linked to the setting value in the main menu
→
[NETWORK SETUP]
→
[STREAMING SETTING]
→
[START].
@
@
NOTE
t
The following functions are also turned off when the camera is turned off.
[WFM]/[D.ZOOM x2]/[D.ZOOM x4]/[FBC]/[S.GAIN]/[ATW]/[ATW LOCK]/[SPOTLIGHT]/[BACKLIGHT]/[Y GET]/[USB MODE]/[PLAYLIST]
