Panasonic AJ-PX800G Page 136 Operating Instructions Manual Download

Page: 136 / 220

– 136 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[START]

When [CAMERA] is selected in [START TRIGGER], the streaming distribution is started/stopped from the

camera.

[ON]:

Starts streaming.

[OFF]:

Stops streaming.

[LAN PROPERTY]

[MAC ADDRESS]

Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)

[DHCP]

Sets whether to use automatic acquisition via DHCP. (Mutually exclusive with [DHCP SERVER] setting)

[ENABLE]:

Uses automatic acquisition.

[DISABLE]:

Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT

GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].

Factory setting: [ENABLE]

[IP ADDRESS]

Sets the IP address when [DISABLE] is selected in [DHCP].

Factory setting: [192.168.0.1]

[SUBNET MASK]

Sets the subnet mask when [DISABLE] is selected in [DHCP].

Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway when [DISABLE] is selected in [DHCP].

Factory setting: [192.168.0.254]

[PRIMARY DNS]

Sets the primary DNS server when [DISABLE] is selected in [DHCP].

Factory setting: [0.0.0.0]

[SECONDARY DNS]

Sets the secondary DNS server when [DISABLE] is selected in [DHCP].

Factory setting: [0.0.0.0]

[DHCP SERVER]

Sets whether to use the DHCP SERVER function when connected via wired LAN. (Mutually exclusive with

[DHCP] setting)

[ENABLE]:

Uses the DHCP SERVER function.

[DISABLE]:

Does not use the DHCP SERVER function.

Factory setting: [DISABLE]

[WIRELESS

PROPERTY]

[MAC ADDRESS]

Displays the MAC address of the wireless LAN of the camera. (Cannot be changed.)

[TYPE]

Sets the connection method.

[DIRECT]:

Accesses to the network function of the camera directly from a smartphone, tablet, or computer.

[INFRA]:

Connects to the wireless access point.

Factory setting: [DIRECT]

[SSID INPUT MODE]

Sets the setting method of SSID. When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item

can be set.

[SELECT]:

Selects from the access point list.

[MANUAL]:

For entering the access point manually.

Factory setting: [SELECT]

[SSID]

Displays network name (SSID).

Factory setting: [AJ-PX800] (When the main menu

→

[NETWORK SETUP]

→

[WIRELESS PROPERTY]

→

[TYPE] is set to [DIRECT])

[BAND]

Switches between two transmission methods (2.4 GHz or 5 GHz).

[2.4GHz], [5GHz]

Factory setting: [2.4GHz]

[CHANNEL (2.4GHz)]

Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and

the camera is connected via wireless LAN.

[AUTO], [CH1], [CH6], [CH11]

Factory setting: [AUTO]

[CHANNEL (5GHz)]

Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the

camera is connected via wireless LAN.

[AUTO], [CH36], [CH40], [CH44], [CH48]

Factory setting: [AUTO]

[ENCRYPTION]

Sets the encryption format used when the main menu

→

[NETWORK SETUP]

→

[WIRELESS

PROPERTY]

→

[TYPE] is set to [DIRECT].

[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]

Factory setting: [WPA2-AES]

[ENCRYPT KEY]

Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64

digits.

The menu setting value is displayed with [

Factory setting: [01234567890123456789abcdef] (When the main menu

→

[NETWORK SETUP]

→

[WIRELESS PROPERTY]

→

[TYPE] is set to [DIRECT])

[DHCP]

Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].

[ENABLE]:

Uses automatic acquisition.

[DISABLE]:

Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT

GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].

Factory setting: [ENABLE]

[IP ADDRESS]

Sets the IP address when [DISABLE] is selected in [DHCP].

Factory setting: [192.168.0.1]

[SUBNET MASK]

Sets the subnet mask when [DISABLE] is selected in [DHCP].

Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].

Factory setting: [192.168.0.254]

[PRIMARY DNS]

Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or

when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.

Factory setting: [0.0.0.0]

Summary of Contents for AJ-PX800G





























































































































































































































Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands

Panasonic AJ-PX800G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands