– 196 –
Chapter 10 Network Connection — Rec during upload function
The transfer status of the clip registered in the upload list can be checked in the main menu
→
[NETWORK SETUP]
→
[FTP CLIENT SERVICE]
→
[UPLOAD LIST].
The viewfinder or LCD monitor shows the operation status of the rec during upload function. In addition, the thumbnail screen shows the operation
status of the rec during upload function and the transfer status of clips.
@
@
NOTE
t
The clips selected with the manual selection mode will be transferred prioritized to the clips registered to the upload list with the automatic transfer
mode.
t
Uploading of the clip will start after the rec during upload function is enabled. To prevent the upload error, do not remove the card from the P2 memory
card slot and the microP2 memory card slot until the upload is completed.
t
Up to 100 clips can be registered in the upload list for the upload of clips. Clips exceeding 100, excluding the uploaded clips and clips failed to upload
cannot be registered.
t
Clips are also automatically transferred during recording, playback, and thumbnail display.
t
If the network is disconnected during transfer, or the power of the camera is turned off and on again, transfer resumes in clip units.
t
While the rec during upload function is enabled, the last clip delete function is disabled.
t
While the rec during upload function is enabled, the streaming function is disabled.
t
The directory on the FTP server is not listed in the FTP explorer screen during the transmission or waiting to transmit the clips registered in the upload
list.
t
The setting value in the main menu
→
[NETWORK SETUP] cannot be changed or initialized while the rec during upload function is set enabled.
t
The copying between the P2 cards will not operate during the transmission or waiting to transmit the clips registered in the upload list.
t
The clip delete function will not operate during the transmission or waiting to transmit the clips registered in the upload list.
t
The format function of the P2 card will not operate during the transmission or waiting to transmit the clips registered in the upload list.
Displaying the upload list
The upload list allows you to check the transfer status of clips to be uploaded.
1
Select the main menu
→
[NETWORK SETUP]
→
[FTP CLIENT SERVICE]
→
[UPLOAD LIST].
The upload list is displayed.
Upload list screen
1
2
3
4
1 [CLIP NAME]
Displays clip names. For the clip where automatic transfer is set, [AUTO] is displayed after the clip name.
2
[STATUS]
Displays the upload status.
[OK]: Uploaded
[ERROR]: Upload failed
[PAUSE]: Preparing the upload
[COPY]: Uploading
[WAIT]: Waiting for upload
3 [SIZE]
Displays the file size.
4 [LAST UPDATE]
Displays the date and time when the [STATUS] display was changed.
Operations on the upload list screen
You can delete, cancel, or re-transfer items from the upload list.
1
Select an item from the upload list.
2
Perform one of the following operations.
f
To delete an item, select [DELETE] with the control stick.
f
To cancel upload, select [CANCEL] with the control stick.
f
To re-transfer an item, select [RETRY] with the control stick.
f
To delete all items, press the <SHIFT> button and the <RESET> button simultaneously. The confirmation screen is displayed, so select [YES]
using the control stick. The current log of the clip information registered to the upload list will also be deleted at this time.
f
To delete the history (items where [STATUS] is [OK] or [ERROR]), press the <SHIFT> button and <EXIT> button simultaneously. The confirmation
screen is displayed, so select [YES] using the control stick.
