– 64 –
Chapter 4 Shooting — Adjusting image quality
Color correction function
This function sets color saturation and phase. It applies individual effect on 15 phases in an image. It can be set to individual color hue.
R
R-Mg
R-R-Mg
Yl-R-R
Yl-Yl-R
B-Cy
Yl-R
G-Yl
Mg-B
Cy-G
Mg
G
Cy
B
Yl
[(PHASE)]
[(SAT)]
r
General settings
Use the camera with the factory settings.
r
Advanced settings
[R (PHASE)]/[R-R-Mg (PHASE)]/[R-Mg (PHASE)]/[Mg (PHASE)]/[Mg-B (PHASE)]/[B (PHASE)]/[B-Cy (PHASE)]/[Cy (PHASE)]/[Cy-G (PHASE)]/[G
(PHASE)]/[G-Yl (PHASE)]/[Yl (PHASE)]/[Yl-Yl-R (PHASE)]/[Yl-R (PHASE)]/[Yl-R-R (PHASE)]:
Changes the phases.
+
makes it rotate clockwise, and
−
makes it rotate counter-clockwise.
[R (SAT)]/[R-R-Mg (SAT)]/[R-Mg (SAT)]/[Mg (SAT)]/[Mg-B (SAT)]/[B (SAT)]/[B-Cy (SAT)]/[Cy (SAT)]/[Cy-G (SAT)]/[G (SAT)]/[G-Yl (SAT)]/[Yl (SAT)]/
[Yl-Yl-R (SAT)]/[Yl-R (SAT)]/[Yl-R-R (SAT)]:
Changes the saturation.
Black control function
This function sets the black level that is to be the reference of luminance.
r
General settings
[MASTER PED]:
Sets the reference black level. RGB also changes by changing this setting.
−
makes the black color darker, and
+
makes it less dark.
r
Advanced settings
Configure the settings in the main menu
→
[SCENE FILE]
→
[RGB BLACK CONTROL SETTING].
[R PED]:
Sets the pedestal level of Rch.
[G PED]:
Sets the pedestal level of Gch.
[B PED]:
Sets the pedestal level of Bch.
[PEDESTAL OFFSET]:
Sets whether to keep the values set for each item of [R PED], [G PED], and [B PED] or reset them when automatic black
balance adjustment is performed.
Gamma function
This function optimizes the tone of images.
r
General settings
[GAMMA MODE SEL]:
Selects a gamma mode from seven types.
r
Advanced settings
Configure the settings in the main menu
→
[SCENE FILE]
→
[GAMMA SETTING].
[MASTER GAMMA]:
Sets the master gamma in 0.01 steps.
f
When [FILM-REC] is selected in [GAMMA MODE SEL]
[F-REC DYNAMIC LVL]:
Sets dynamic range.
[F-REC BLACK STR LVL]:
Sets black stretch.
f
When [VIDEO-REC] is selected in [GAMMA MODE SEL]
[V-REC KNEE SLOPE]:
Sets knee slope.
[V-REC KNEE POINT]:
Sets knee point.
[BLACK GAMMA]:
Sets the gamma curve compression and expansion of dark areas.
[B. GAMMA RANGE]:
Sets the maximum level to perform compression/expansion.
Knee function
This function sets the compression of video signals to prevent halation in images.
r
General settings
Use the camera with the factory settings.
