Panasonic AJ-PX800G Page 138 Operating Instructions Manual Download

Page: 138 / 220

– 138 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[DATE/TIME]

Sets date and time display.

[TIME]:

Displays the hour, minute, and second.

[DATE]:

Displays the year, month, and date.

[TIME&DATE]:

Displays the hour, minute, and second, as well as year, month, and date.

[OFF]:

Does not display.

Factory setting: [OFF]

[REC COUNTER]

Sets operation of the counter for recording.

[TOTAL]:

Performs continuous counting until it is reset using the <RESET> button.

[CLIP]:

Clears the counter value at the start of recording and counts the time for each recording.

Factory setting: [TOTAL]

[P2CARD REMAIN]

Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[BATTERY]

Turns the battery charge level indicator [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[REC DURING UPLOAD]

Selects [ON]/[OFF] of the rec during upload status display.

[ON], [OFF]

Factory setting: [ON]

[STREAMING]

Selects [ON]/[OFF] of the status display indicating the distribution status of the streaming video.

[ON], [OFF]

Factory setting: [ON]

[OTHER DISPLAY]

Sets display details of other information.

[PARTIAL]:

Displays information partly.

[ALL]:

Displays all information.

[USER]:

Displays the information set in [DISPLAY SETTING].

Factory setting: [PARTIAL]

[DISPLAY SETTING]

[IRIS]

Displays/hides F value and auto iris control status.

[ON], [OFF]

Factory setting: [ON]

[GAIN]

Displays/hides gain value.

[ON], [OFF]

Factory setting: [ON]

[SHUTTER]

Displays/hides shutter speed.

[ON], [OFF]

Factory setting: [ON]

[WHITE BALANCE]

Displays/hides the <WHITE BAL> switch position.

[ON], [OFF]

Factory setting: [ON]

[ND]

Displays/hides the set value of ND filter.

[ON], [OFF]

Factory setting: [ON]

[EXTENDER]

Displays/hides the lens extender.

[ON], [OFF]

Factory setting: [ON]

[Y GET]

Displays/hides brightness of Y GET.

[ON], [OFF]

Factory setting: [ON]

[D.ZOOM]

Displays/hides digital zoom display.

[ON], [OFF]

Factory setting: [ON]

[SCENE FILE]

Displays/hides scene file name.

[ON], [OFF]

Factory setting: [ON]

[CAC]

Displays/hides the operation when the chromatic aberration compensation function is activated.

[ON], [OFF]

Factory setting: [ON]

[DRS]

Toggles whether to display when the dynamic range stretcher function is activated.

[ON], [OFF]

Factory setting: [ON]

[FBC]

Toggles whether to display when the flash band compensation function is activated.

[ON], [OFF]

Factory setting: [ON]

[SHOOTING MODE]

Displays/hides high-sensitivity mode.

[ON], [OFF]

Factory setting: [ON]

[PB MODE]

Displays/hides the operation status of playback.

[ON], [OFF]

Factory setting: [ON]

[SYSTEM MODE]

Displays/hides system mode.

[ON], [OFF]

Factory setting: [OFF]

Summary of Contents for AJ-PX800G





























































































































































































































Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands

Panasonic AJ-PX800G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands