Panasonic AJ-PX800G Page 135 Operating Instructions Manual Download

Page: 135 / 220

– 135 –

Chapter 6 Menu Operations — Menu list

Item

Description of settings

[NETWORK SEL]

Sets the connection method when connecting the camera with an external device (such as a computer) via

network.

[WLAN]:

Connects via wireless LAN.

[4G/LTE]

: Connects via 3G/4G/LTE.

[LAN]:

Connects via the <LAN> terminal.

[OFF]:

Does not connect.

Factory setting: [OFF]

[NETWORK FUNC]

[HTTP SERVER]

Configures the settings regarding the HTTP server.

[BROWSE]:

Enables the P2 browser function.

[BROWSE (

CTRL)]:

Enables the HTTP server function, starting and stopping recording at the terminal

side, and preset control of time code or user bits.

[DISABLE]:

Disables the HTTP server function.

Factory setting: [DISABLE]

[PLAYLIST]

Sets entering/exiting of the playlist edit mode.

[ON], [OFF]

Factory setting: [OFF]

[IP REMOTE]

[ENABLE]:

Enables remote control with IP connection.

[DISABLE]:

Disables remote control with IP connection.

Factory setting: [DISABLE]

[USER ACCOUNT]

Sets the user account name.

[ACCOUNT LIST]

Displays the currently set user account name. Registering of new accounts, deleting accounts, or changing

password can also be performed.

[FTP CLIENT SERVICE] [SETTING DATA]

Sets the source from where client service settings are acquired.

[INTERNAL]:

Uses the setting value set on the camera.

[SD CARD]:

Uses the setting value of the file inside the SD memory card inserted in the SD card slot.

When this item is set to [SD CARD], insert an SD memory card before turning on the power of the camera.

Factory setting: [INTERNAL]

[SERVER URL]

Sets the server name or an address to connect to.

[LOGIN USER]

Sets the user ID to connect to.

[LOGIN PASSWORD]

Sets the password to connect to.

The menu setting value is displayed with [

[SSH]

Sets when transferring files using SSH.

[ENABLE]:

Uses SSH.

[DISABLE]:

Does not use SSH.

Factory setting: [DISABLE]

[SSH PORT]

Sets the network port number when SSH is used. Set the same number as that of the server side.

The menu setting value is displayed with [

Factory setting: [22]

[LOAD (SD CARD)]

Loads the setting value of the client service from the SD memory card.

[SAVE (SD CARD)]

Saves the setting value of the client service onto the SD memory card.

[REC DURING

UPLOAD]

Sets whether to use the rec during upload function.

[ENABLE]:

Uses the rec during upload function.

[DISABLE]:

Does not use the rec during upload function.

Factory setting: [DISABLE]

[AUTO COPY]

Sets whether to enable the function to register clips recorded using the camera automatically to the upload

list when recording stops, and if enabled, sets the type of target clip.

[REC CLIP(PROXY)]:

Upload target is proxy data of recorded clips.

[REC CLIP]:

Upload target is recorded clips (main recording data and proxy data).

[DISABLE]:

Does not automatically upload recorded clips.

Factory setting: [DISABLE]

[UPLOAD LIST]

Displays the list information of clips to upload.

[SAVE LOG (SD CARD)] Save up to the latest 1000 logs for clip information (month and date, clip number (global clip ID), status)

registered in the upload list to an SD memory card.

[STREAMING SETTING] [START TRIGGER]

Sets the method for starting video streaming.

[CAMERA]:

Starts/stops streaming from the camera.

[RECEIVER]:

Operates the start/stop of the streaming distribution from the terminal on the network using

the P2 Browser or the P2 Streaming Receiver.

Factory setting: [RECEIVER]

[SETTING DATA]

Sets the source from where settings for streaming is acquired when [CAMERA] is selected in [START

TRIGGER].

[INTERNAL]:

Uses the setting value set on the camera.

[SD CARD]:

Uses the setting value of the file inside the SD memory card inserted in the SD card slot.

When this item is set to [SD CARD], insert an SD memory card before turning on the power of the

camera.

Factory setting: [INTERNAL]

[SERVER ADDR.]

Sets the IP address of the device receiving the streaming video when [CAMERA] is selected in [START

TRIGGER].

[RTSP PORT]

Sets the RTSP port number required for streaming when [CAMERA] is selected in [START TRIGGER].

Factory setting: [554]

[LOAD (SD CARD)]

When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the

connection information necessary for streaming distribution is loaded from the SD memory card.

[SAVE (SD CARD)]

When [CAMERA] is selected in [START TRIGGER] and [INTERNAL] is selected in [SETTING DATA], the

connection information necessary for streaming distribution is saved to the SD memory card.

Summary of Contents for AJ-PX800G





























































































































































































































Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands

Panasonic AJ-PX800G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX800G

Reviews:

Related manuals for AJ-PX800G

Brands by name

Popular brands