Otto Bock Myo Plus TR, Instructions For Use Manual, Page: 31 / 272

31
NOTICE
Failure to observe the system requirements for the installation of the Myo Plus app
Malfunction of the device.
► Install the Myo Plus app only on the operating systems listed in the section "System require­
ments" (see Page 34). The tested devices are listed in this section as well.
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
customer service, etc.).
5 Scope of Delivery and Accessories
Scope of Delivery
Items in the scope of delivery or accessories marked with
▀
are application parts according to the
IEC 60601-1:2005/A1:2012 standard.
•
1 pc. 13E520 Myo Plus TR
• 1 pc. 646C107 Bluetooth PIN card
• 1 pc. lug wrench
• 1 pc. lamination dummy for Myo Plus TR
• 1 pc. positioning gauge for O&P professional 623F50
• 3 pc. 13Z164 cable marking
• 1 pc. cable pull-off protection cap
• 1 pc. No Carbon Zone sticker
• 1 pc. 647G1381 instructions for use (qualified personnel)
• 1 pc. 647G1382 instructions for use (user)
Accessories
• 3 pc - 8 pc 13E400=*/13E401=* Remote electrodes
The remote electrodes can be combined with any of the following electrode domes:
•
13Z161 electrode dome, flat ▀ (6 pc. per package)
or
•
13Z162 electrode dome, medium
▀
(6 pc. per package)
or
•
13Z163 electrode dome, high
▀
(6 pc. per package)
• Myo Plus app
iOS app: 560X18-IOS=V* Myo Plus
Android app: 560X18-ANDR=V* Myo Plus
6 Charging the battery
We recommend charging on a daily basis. If the device is not used for an extended period, the
battery charge level should be checked regularly and the battery recharged.
1) Connect the charging plug to the charging receptacle of the product.
→ A correct connection between the battery charger and the product is indicated by feed­
back (see Page 40).
→ The product is switched off automatically.
→ The charging process starts.