Otodynamics Otoport Advance User Manual Download Page 259

Page: 259 / 296

259

29.3.1

Stimuli description

Click stimuli: 80µS duration square pulse of alternating polarity.

Chirp stimuli: 2.5ms duration of alternating polarity. The frequency

dispersion of the chirp is defined by the delay at frequency

T(f)= k * f^

−d

with k=0.0920, and d=0.4356.

The wide band chirp waveform was cosine filtered in the time domain to

give the required duration and a frequency range of 1686 to 4614Hz (-3dB

points). The waveform and spectra of the short chirp are illustrated below.

Short Chirp time domain (x-axis in samples at 25.6kHz):

Short Chirp frequency domain:

Mode of operation

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands