Otodynamics Otoport Advance User Manual Download Page 200

Page: 200 / 296

CHAPTER EIGHTEEN

Transfer

200

When a print is initiated, the Otoport will establish communication with the

printer. The screen

Searching for Printer

will be displayed.

The printout will then commence. The screen will display

Printing

during

the print process. Select

Cancel

to terminate the printout. When the

printout is completed, the screen from which the print was initiated will be

displayed.

If there is a problem connecting to the printer using the wired method, the

message

Check Connection!

will be shown briefly and then the screen

from which the print was initiated will be displayed. Check the printer is

connected correctly and switched on then re-try. If the printer continues to

fail to connect, switch the Otoport off, then on and press the black key on

the printer to feed the paper through.

Printing

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands