Otodynamics Otoport Advance User Manual Download Page 205

Page: 205 / 296

205

18.9

Charging the printer

To charge the printer, plug the charger into a mains outlet socket and insert

the charger jack plug into the rear of the printer. The light on the printer will

flash green/orange to show the printer is on charge. The red charger light

will also illuminate. A full charge will take approximately 15 hours.

Charger jack plug socket

The printer can be used as normal whilst charging.

Once fully charged, the printer has enough power for around 10 hours

standby use. The batteries should provide enough power to print several

rolls of paper. The printer light will flash green/red when the batteries are

low.

Note:

The printer charger is not medically approved. The Otoport must

not be in patient contact if connected to the printer whilst the

printer is charging.

TRAINING

REQUIRED

Printing

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands