Otodynamics Otoport Advance User Manual Download Page 89

Page: 89 / 296

DPOAE test

Distortion Product OAE testing involves presenting two continuous pure

tones of different frequencies (f1 and f2 where f2 = 1.22 x f1). Distortion is

produced by the cochlea and is measured at a third frequency (2f1-f2).

After choosing either the

Quick

option, or selecting

Test

on the patient

details screen, the test choice screen is available.

10.1

Test choice

Choose a

mode from the listed test modes using the arrow keys, then

press

Select

. Descriptions of the test modes are given in section

17.10.1

. If

the DP mode you wish to use is not displayed, refer to chapter

Test set-

TRAINING

REQUIRED

OTOPORT

ADVANCE

ONLY

DPOAE test

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Otodynamics Otoport Advance, User Manual, Page: 89 / 296

Search results

Summary of Contents for Otoport Advance

Reviews: