Otodynamics Otoport Advance User Manual Download Page 206

Page: 206 / 296

CHAPTER EIGHTEEN

Transfer

206

18.10

Changing the battery

The printer battery will

provide up to 500 charge and

discharge cycles. If the battery

performance deteriorates

the batteries will need to be

changed. A spare battery

cradle, which takes 4 AAA

batteries, is provided with the

printer. Alternatively a new battery pack can be obtained from your dealer

or Otodynamics.

To change the battery pack:

Remove the screw (1) from the battery compartment cover.

Push down, and slide back the

battery compartment cover (2).

Remove the old battery pack

and disconnect the battery

pack connector, noting its

orientation.

Fit the battery pack connector

(3) taking care to insert it

correctly.

Fit the battery pack ensuring

wires (4) are not trapped.

Slide back the battery

compartment cover and

replace the screw.

Important Note:

Only charge the printer if it contains an approved battery pack,

supplied by your dealer or Otodynamics Ltd.

TRAINING

REQUIRED

Printing

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands