Otodynamics Otoport Advance User Manual Download Page 107

Page: 107 / 296

107

ABR test

The Auditory Brainstem Response (ABR) test records the

electrophysiological response of the auditory system to sound.

Select

ABR Test

from the scrolling modules using the arrow keys. After

choosing either the

Quick

option, or selecting

Test

on the patient details

screen, the test choice screen is shown.

11.1

Test choice

Choose an

ABR

mode from the listed test modes using the arow keys, then

press

Select

Descriptions of the test modes are given in section

17.10.1

If the ABR mode you wish to use is not displayed, refer to chapter

Test

setup

If only one ABR mode is

in the

Test setup

area (see chapter

), the

test choice screen will not appear and the test will start immediately.

TRAINING

REQUIRED

ABR test

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Brands by name

Popular brands