manualshive.com logo in svg

Otodynamics Otoport Advance, User Manual, Page: 275 / 296

Share
Download
Otodynamics Otoport Advance User Manual Download Page 275

275

31.2

  Electromagnetic Compatibility: Otoport

The Otoport should be put into service according to the EMC (Electromagnetic 

Compatibility) information provided here.

Portable and mobile RF (Radio Frequency) communications equipment can affect 

the operation of the Otoport. In particular, mobile telephones (‘cellphones’) should 

not be operated within 3.3m of the Otoport.
The use of probes, chargers and connection cables other than those supplied by 

Otodynamics Ltd, and specifically for use with the Otoport may result in increased 

emissions or decreased immunity of the Otoport.

Guidance and manufacturer’s declaration – electromagnetic emissions

The Otoport is intended for use in the electromagnetic environment 

specified below. The user of the Otoport should ensure that it is used in such 

an environment.

Emissions test 

Compliance  Electromagnetic environment    

 

 

- guidance

RF emissions  

Group 1 

The Otoport uses RF energy only for

CISPR 11 

 

its internal function. Therefore, its RF 

 

 

emissions are very low and are not 

 

 

likely to cause any interference in 

 

 

nearby equipment.

RF emissions 

Class B 

The Otoport is suitable for use in all

CISPR 11 

 

establishments, including domestic 

 

 

establishments and those directly 

 

 

connected to the public low-voltage 

 

 

power supply network that supplies 

 

 

buildings used for domestic purposes

Harmonic emissions  Class A

IEC 61000-3-2 

Voltage fluctuations/   Complies

flicker emissions

IEC 61000-3-3 

The Otoport should not be used adjacent to or stacked with other equipment and 

that if adjacent or stacked use is necessary the Otoport should be observed to verify 

normal operation in the configuration in which it is used.

 

Technical specifications

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Reviews:

No comments