manualshive.com logo in svg

Otodynamics Otoport Advance, User Manual

Share
Download
Otodynamics Otoport Advance User Manual Download Page 193

193

18

 Transfer 

 

(printing and downloading)

 

Test results can be printed on the optional Otoport mini-printer or 

downloaded to PC for printing, archive or export.  Wireless (via Bluetooth) 

and wired (via supplied cables) connections are available for both 

functions.

 

The Transfer module sets up and initiates transfers.

18.1

  Bluetooth wireless printing and 

download

 

Wireless printing and downloading are only available on Bluetooth enabled 

Otocheck ABR and Otoport instruments.  If a Bluetooth module is fitted, 

a Bluetooth symbol (shown above) is included on the product label.  

Downloading can also be performed with a wired connection, using the 

cables supplied.

 

However, the Bluetooth connection supports 

either

 printing 

or 

downloading, 

not both (see 

Transfer Menu below

 to select which function is available).  

The softkey 

Print 

or 

PC-Load 

is shown on screen whenever the function is 

available.  

Printing

Otoport OAE+ABR

User Manual for Advance and Screener

Summary of Contents for Otoport Advance









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands