1
With the arrow at the front,
connect the probe and screw
the knurled sleeve until finger
tight.
2
Press the button to turn
on the Otoport. Confirm
within 2 seconds by
pressing the button.
3
Date, time and battery
status are displayed while
system checks are
performed.
2
Use the and buttons to
select the test mode.
knurled sleeve
1
Select an appropriate tip.
2
Fit the tip to the earpiece.
3
Fit the earpiece in the ear
canal.
3
A vertical stimulus needle and
low noise, with two blue LEDs,
indicate a good probe fit.
Press to
START
the test.
Step 1. Setting up your Otoport
Step 2. Fitting the earpiece
Step 3. Performing a TEOAE test
OAE QUICKSTART
1
Use the arrow buttons to
find the TEOAE screen.
To run a
QUICK
test, press
the
button.
Otoport
Screener
Summary of Contents for Otoport Advance
Page 296: ...CHAPTER THIRTY TWO Index 296...
