Otodynamics Otoport Advance User Manual Download Page 164

Page: 164 / 296

CHAPTER SEVENTEEN

Test set-up

164

17.5.1

DP Growth test config

The sequence of stimulus levels delivered during a DP Growth test is

important and will greatly affect the growth function obtained.

The sequence of L2 stimulus levels used in DP Growth tests are pre-set.

The sequence of L1 levels are set by the parameters

Max L2=70 L1

and

Step L2 = -5 L1

Field

Description

Max L2=70 L1

The highest intensity of L2 is fixed at 70dBSPL.

The highest intensity of L1 is presented here.

Range: 75-50dBSPL

Step L2 = -5 L1

The intensity level of L2 is reduced from the 70dB in

steps of 5dB. The rate at which L1 is reduced can be

the same or less than that for L2. The rate at which L1

is reduced is set here.

Range: L1 steps: 0 to -5dB (increments of 1dB)

OTOPORT

ADVANCE

ONLY

Test set-up

Summary of Contents for Otoport Advance









































































































































































































































































































Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands

Otodynamics Otoport Advance, User Manual

Search results

Summary of Contents for Otoport Advance

Reviews:

Related manuals for Otoport Advance

Brands by name

Popular brands