3-38
Operator’s Manual – OPTI CCA-TS2
3 CUSTOMIZATION
3.2.4.6 Configuring Ethernet Settings
The
<Ethernet>
screen is used to configure
Ethernet settings required for discovery and set the
IP address if static.
1. In the main menu, select
<System Manager>
and
<Setup>
.
2. In the
<System Setup>
menu, press the
<System>
tab and then
<Ethernet>
(Fig. 3-85).
3. The
<System>Setup>Ethernet>
menu will
appear (Fig. 3-86).
To set up Ethernet communication:
1.
Connect the instrument to an active network.
2.
In the main menu, select
<System Manager>
Diagnostics>Tests>Ethernet>
.
3.
Verify that the test status is
<Connected>
and
that the displayed instrument IP address is valid
(not all zeros) (Fig. 3-87).
Fig. 3-85 Ethernet
Fig. 3-86 Ethernet Settings
Fig. 3-87 Ethernet Test