3-32
Operator’s Manual – OPTI CCA-TS2
3 CUSTOMIZATION
To
adjust the tracking barometer within the OPTI
CCA-TS2
, follow the instructions below:
1. In the main menu, select
<System Manager>
and
<Setup>
.
2. In the
<System Setup>
menu, press the
<System>
tab and then
<Hardware>
to select
this function (Fig. 3-73).
3. Press
to enter an offset from the true
barometric pressure (Fig. 3-74).
4. Type in the new numbers and press
to
accept the changes.
5. Press
to return to the
<Setup>
screen or
to return to the main menu.
CAUTION:
Use the absolute barometric pressure
and not the altitude-corrected pressure
(check with your local weather service
or airport).
NOTE: You may change barometric pressure units
from mmHg to mbar (See section 3.2.4.2).
NOTE: You should check the barometric pressure
periodically.
3.2.4.4 Hardware Settings
Fig. 3-73 Select Hardware
Fig. 3-74 Barometric pressure
The
<Hardware>
menu is used to
adjust the local
barometric pressure,
the audible alarm, and standby
mode.
3.2.4.4.1 Entering the Barometric Pressure