Operator’s Manual – OPTI CCA-TS2
1-7
1 INTRODUCTION
Next to the battery pack is the
power connector
where you can connect the OPTI CCA-TS2 to an
external power supply (Fig. 1-11).
The
power button
is located on the left side of the
unit next to the power connector (Fig. 1-11).
NOTE: To power down the system, hold the power
button in for 2 seconds.
The OPTI CCA-TS2 is equipped with a carrying
handle for easy transport, which can also be used as
a tilt stand to place the instrument at a convenient
viewing angle for the user.
•
To extend the handle to carrying position, place
the analyzer on its back and position your
fingers in the cutouts on each side of the handle.
Push up until the handle is fully extended
(Fig. 1-12).
•
To use the handle as a tilt stand, pull down the
handle (Fig. 1-13) and lock it in the lower
position (Fig. 1-14). Turn analyzer back to
original position (Fig. 1-15).
Fig. 1-12 Carrying Handle
Fig. 1-13 Pull down handle
Carrying Handle
Fig. 1-11 Power Connector and Power Button
Power Connector and
Power Button
Fig. 1-14 Tilt stand
Fig. 1-15 Tilt stand