3-24
Operator’s Manual – OPTI CCA-TS2
3 CUSTOMIZATION
3.2.3.1.3 Setting up User Groups
Fig. 3-55 Groups
The
<Groups>
menu is used to set up user groups
and assign group permissions to perform specific
functions on the analyzer.
1. Select the
<Groups>
tab in the
<System>
Setup>Security>
menu (Fig. 3-55).
There are 2 system default user groups:
•
The
ADMIN
group has access to all
functions in the analyzer. This user group
cannot be changed or deleted, however,
other users may be added to the
ADMIN
group.
•
A
User
group has also been set as a default.
This group may be edited or deleted.
2. To add a new user group, press
in the top
section of the screen (Fig. 3-55).
3. In the subsequent screen (Fig. 3-56), press
and type a unique name for the user group.
Press
.
4. To assign group functions to a user group, press
<Functions>
(Fig. 3-56).
•
The top half of the
<Select Group
Functions>
screen (Fig. 3-57) displays all
available options, the bottom half shows the
selected options.
5. To add group functions, select the desired option
from the top menu and press the blue
<Down>
arrow
to move this option to your list in the
selection field on the bottom.
The default options for user group functions are:
Patient Measurement
Control Measurement
SRC Measurement
tHb Calibrator
Perform Maintenance
Control Setup
Fig. 3-56 Enter Group Name
Fig. 3-57 Group Functions