On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
94
•
Edit Event Window's Fields
The
Edit Event
window (for editing input events) contains the following fields:
Field
Description
External
sensor
connected to
Read-only field, displaying the name of the device on which the input event is
defined.
Sensor
connected
through
Lets you select which of the device's input ports the sensor used for the input
event should be connected to.
Event occurs
when input
goes
Lets you select whether the input event should be triggered when the signal on
the input sensor rises or falls:
•
Low:
Trigger input event when the signal on the sensor is falling
•
High:
Trigger input event when the signal on the sensor is rising
For exact information about what constitutes a falling and a rising signal
respectively, refer to documentation for the sensor and device in question.
External event
name
Lets you edit the name of the input event.
Note:
Event names must not contain the following characters: < > & ' " \ / : * ? |
[ ]
Note:
Some camera devices only support event names of a certain length
and/or with a certain structure. Refer to the camera's documentation for exact
details.
Send e-mail if
this event
occurs
Select check box to send an e-mail alert when the input occurs.
Note:
In order to be able to use e-mail alerts, the e-mail alert feature must
have been set up in the
Include image
from camera
Available only if the
Send e-mail if this event occurs
check box is selected.
Select check box to include an image, recorded at the time the input event is
triggered, in the e-mail alert, then select the required camera in the list next to
the check box.
Send SMS if
this event
occurs
Select check box to send an SMS alert when the input occurs.
Note:
In order to be able to use SMS alerts, the SMS alert feature must have
been set up in the
