On-Net Surveillance Systems, Inc.
NetDVR 6.5
NetMatrix
192
want to customize the way your NetMatrix application should behave; consult your surveillance
system administrator if in doubt.
•
Always On Top:
If selected (default), this setting forces the NetMatrix window on top of
other windows. This setting can subsequently be changed from a menu accessible by
right-clicking inside the NetMatrix window.
•
Auto Accept All Commands
: If selected (default), this setting will make your NetMatrix
application automatically accept all commands received from allowed hosts (provided the
commands are accompanied by the correct password). If this setting is not used, a dialog
in the NetMatrix window will prompt you to accept each received command.
•
Display Camera Info:
If selected (default), this setting will show camera information in the
NetMatrix window. This allows camera names or camera IP addresses to be displayed,
even if the NetMatrix window is running in full screen mode.
The same image with and without camera information
•
Keep Video Aspect Ratio:
If selected (default), this setting will keep the original aspect
ratio (i.e. height/width relationship) when the NetMatrix window is resized. If this setting is
not used, video will be stretched to fill the available space.
The same image with (left) and without (right) original aspect
ratio. Note how keeping the original aspect ratio often leads
to black bars around the video, whereas stretching may
distort the video slightly.
•
Reconnect On Startup:
If selected (default), the NetMatrix will automatically attempt to
connect to the last connected camera when starting. If this setting is not used, no camera
connection will be attempted at startup.
•
Camera Layout:
Lets you select whether the NetMatrix window should run in 1×1 or 2×2
mode.
