On-Net Surveillance Systems, Inc.
NetDVR 6.5
Access Clients
177
In the
Port
field, specify the port number you used during IIS configuration (default port number is 8080).
12. Click
Next
twice.
13.
When installation is completed, click the
Close
button.
•
Verifying the NetPDA/NetCell Server Installation
Before you begin installing and using the NetPDA/NetCell Client, it is highly recommended that you verify
that the NetPDA/NetCell Server is installed correctly:
First make sure that the NetDVR system's recording server service and Image Server service are running,
and that a user with access to relevant cameras has been set up in the
Image Server Administrator.
Tip:
You can use a NetGuard or NetGuard-EVS to verify that the Image Server's user setup works.
Then do the following:
1. Double-click
the
PDAServer
desktop shortcut created during the
NetPDA/NetCell Server
installation:
This will open the
NetPDA/NetCell Server Administrator
dialog:
2. In the lower half of the
NetPDA/NetCell Server Administrator
dialog, verify that the
Test enabled
check box is selected, then click the link below the check box to open the test interface in a
browser:
3. Log in to the test interface by typing the user name and password as set up on the
Image Server
,
then click the
Login
button.
The test interface will now log in to the
Image Server
, and list all cameras to which the user has
