On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
151
time video from the older events is shifted to less prominent positions and eventually
”pushed out” of the NetMatrix recipient in order to make space for the latest event's video.
With the
Connect
option, you may thus experience that if video triggered by one event
on a camera is already shown on the NetMatrix recipient, videos triggered by another
event on the same camera would not be displayed prominently as coming from the latest
event – simply because the NetMatrix recipient is already showing video from the
camera in a less prominent position.
By selecting
Disconnect, then connect
you can avoid this issue, and ensure that video
from the latest event is always displayed prominently.
•
Disconnect:
Disconnect the camera (you will specify the actual camera in the next step).
Use if a particular event should cause video from a particular camera to stop being
displayed in the NetMatrix recipient, even if they are not yet old enough to be ”pushed out”
of the NetMatrix recipient.
When you have selected an action, another red exclamation mark will indicate that there is still
some configuration to be done:
4. Right-click the action to select which camera to apply the action on:
In this example, we have specified that when motion is detected on Camera b, the selected
NetMatrix recipient should connect to Camera b:
5.
Repeat as required. Bear in mind that you define events and actions for a single NetMatrix recipient at a
time.
