On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
136
This will open the
Output Settings for [Device Name] [Camera Name]
7. In
the
All Outputs
list in the window's left side, select the required output, then click the
>>
button located
between the
All Outputs
list and the
On Motion Detected
list:
This will copy the selected output to the
On Motion Detected
list, which lists all outputs to be automatically
triggered when motion is detected by the camera..
Good to know:
•
You are not limited to selecting output connected to the camera itself. If output has been defined on
other cameras/devices on the NetDVR system, this output will also be selectable in the
All Outputs
list.
•
An unlimited number of outputs may be selected this way.
•
The
Output Settings for [Device Name] [Camera Name]
window also lets you select output for
manual triggering in NetGuard and NetGuard-EVS. This is further described in
8. When ready, click the
Output Settings for [Device Name] [Camera Name]
window's
Exit
button to return to
the
Camera Settings for [Device Name] [Camera Name]
window.
