On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
90
•
Add New Event Window's Fields
The
Add New Event
window (for devices capable of handling one input event only) contains the following
fields:
Field, Check
Box
Description
External
sensor
connected to
Read-only field, displaying the name of the device on which the input event is
defined.
Sensor
connected
through
Lets you select which of the device's input ports the sensor used for the input
event is connected to.
Event occurs
when input
goes
Lets you select whether input event should be triggered when the signal on the
input sensor rises or falls:
•
Low:
Trigger input event when the signal on the sensor is falling
•
High:
Trigger input event when the signal on the sensor is rising
For exact information about what constitutes a falling and a rising signal
respectively, refer to documentation for the sensor and device in question.
External event
name
Lets you specify a name for the input event.
Note:
Event names must not contain the following characters: < > & ' " \ / : * ? |
[ ]
Note:
Some camera devices only support event names of a certain length
and/or with a certain structure. Refer to the camera's documentation for exact
details.
Send e-mail if
this event
occurs
Select check box to send an e-mail alert when the input occurs.
Note:
In order to be able to use e-mail alerts, the e-mail alert feature must
have been set up in the
Include image
from camera
Available only if the
Send e-mail if this event occurs
check box is selected.
Select check box to include an image, recorded at the time the input event is
triggered, in the e-mail alert, then select the required camera in the list next to
the check box.
Send SMS if
this event
occurs
Select check box to send an SMS alert when the input occurs.
Note:
In order to be able to use SMS alerts, the SMS alert feature must have
been set up in the
