Online USV 10000 3/1 XANTO S Series, User Manual

Page: 84 / 192

O P E R A T I O N
84 / 192
XS20000_31_manual_ger_eng_it_V1.1.2.doc R. Kistler
UPS systems status Audio alarm signal
Error message Continuous
Warning message 1x per second
Overload 2x per second
Battery mode 1x every 4 seconds, for weak battery 1x every second.
Bypass mode 1x every 2 minutes
Table 5: Audio alarm signals
4.2 Start screen
The start screen displays all important information at a glance By
default or after 15 min. of inactivity (e.g. for settings), the start screen
will be displayed on the LCD.
Figure 11: Start screen
UPS line input: The mains input (line) and the bypass input (by-
pass) are shown alternatingly with voltage and frequency.
UPS operating state: The respective operating state is displayed,
e.g. normal mode (see Operating states ).
Battery: The battery is displayed as bars. For fully charged batteries,
the bar appears completely black. More detailed information is in-
cluded in the battery status. To see this information, press the
but-
ton twice.
UPS output: Output voltage and frequency are displayed.
Load: The connected power (W and %) are displayed.