I N S T A L L A T I O N
75 / 192
XS20000_31_manual_ger_eng_it_V1.1.2.doc
R. Kistler
3.3
Checking the accessories
Refer to the following table for the scope of supply:
UPS system
Battery module
Description
XANTO S
10000 3/1
XANTO S
20000 3/1
Battery module XANTO
S 10000 / 20000 3/1
RS-232 interface cable
1
1
Parallel cable
1
1
Parallel port cover
1
1
Parallel port holder
1
1
Wire jumper
1
1
DataWatch software
1
1
Operating instructions
1
1
Battery cable (3x 10mm², 2,3m)
1
Table 1: Scope of supply
3.4
Mechanical installation
The UPS system/the battery module is delivered completely assem-
bled and ready-to-connect.
CAUTION
The housing is heavy (see
Technical Data
). At least two per-
sons are required for moving the UPS system/the battery
module.
1. Place the UPS system on a level, stable surface at its final
position.
2. Allow for 0.5 m of space at the front and rear side of the UPS
system to ensure sufficient air circulation.
3. If you are installing an additional battery module, position this
next to the UPS system at its final position.
4. For stability, we recommend bolting down the UPS system/the
battery module to the floor (see Figure 4).
Summary of Contents for 10000 3/1 XANTO S Series
