Online USV 10000 3/1 XANTO S Series, User Manual

Page: 115 / 192

T R O U B L E S H O O T I N G
115 / 192
XS20000_31_manual_ger_eng_it_V1.1.2.doc R. Kistler
8. Troubleshooting
The XANTO S is designed for automatic operation and reports any
occurring problems during operation automatically. Normally, the
warning messages shown on the control panel do not mean that
the output voltage is affected. It is usually a preventative message
intended to make the user aware of a problem.
NOTE

Active warning/error messages are shown in the display with
red background illumination and black text (see
Operating
states )

Active warning/error messages are additionally indicated
by an audio alarm signal (see
Operating states )

Rectify the cause of the problem or contact support
Check the status menu on a list of active warning/error messages:
1. Press the button for at least one second to enable the menu
options.
2. Press the button until the "UPS STATUS" is displayed.
3. Press the button to display the list of active warning/error
messages.
Check the event log for the progression of warning/error messages
and events:
1. Press the button for at least one second to enable the menu
options.
2. Press the button until "EVENT LOG" is displayed.
3. Press the button to display a list of active status messages.