![background image](http://html.mh-extra.com/html/omron/z4lb-v2/z4lb-v2_instruction-manual_1633323028.webp)
1-1
Section
Inspection for Loose Bottle Caps
3
Operation Flow
Item
Applicable Sensors
1-1-1 Wiring and Connections
Standard and One-side
Interruption High-precision
1-1-2 Axis and Gain Adjustments
Standard
1-1-3 Setting Measurement Unit
Standard
1-1-4 Setting Thresholds
Standard and One-side
Interruption High-precision
1-1-5 Detection
Standard and One-side
Interruption High-precision
1-1-1
Wiring and Connections
The following information is the same for both Standard and
One-side Interruption High-precision Sensors.
1
Wire and connect the sensor components as shown below.
V/mm
→
Refer to 2-2
Wiring (p. 14)
and
2-3 Connections (p. 18)
.
Brown (12 to 24 VDC)
Blue (0 V)
White (HIGH/PASS output)
Gray (LOW/NG output)
Black (1- to 5-V linear output)
Shield (Linear GND)
Green (Bank selection input)
Purple (Timing input)
Red (Hold reset input)
Orange/Purple (Forced-zero input)
Pink (LD OFF input)
Amplifier
Emitter
Receiver
2
Turn ON the power.