![background image](http://html.mh-extra.com/html/omron/z4lb-v2/z4lb-v2_instruction-manual_1633323066.webp)
4-2
Section
Key Settings
43
Procedure
1
Set the operating mode selector to RUN.
2
Press the TEACH Key for 3 s.
The Sensor will enter function selection mode.
3
Set the Up Key to go to the hold.
scale
oUt
hys
hold
Measurement
width
Discrimination
outputs
Hysteresis
setting
Hold
4
Press the SET Key
The hold can now be selected.
5
Press the Up Key and select the hold.
norml
pĆh
bĆh
sĆh
sbĆh
spĆh
ppĆh
Normal
Peak hold
Bottom hold
Sample hold
Self-bottom hold
Self-peak hold
Peak-to-peak hold
If the self-peak hold or self-bottom hold was selected, go to
step 6 and set the trigger level, otherwise go to step 8.
6
Press the SET Key.
The selected hold will be set.
7
Press the Right Key to move the cursor the digit to be
changed and press the Up Key to set the trigger level.
Default setting: The trigger level is set to 01.000 when the
measurement unit is V and 00.000 when the measurement
unit is mm.
0
0.000
0
0
.000
0
3
.000
The selected digit flashes.
Select the digit.
Set the value.
8
Press the SET Key.
The trigger level will be entered and the Sensor will return to
function selection mode.
9
Press the TEACH Key to return to RUN mode.