2-5
Section
Sensor Installation
21
2
Secure the mounting brackets.
Screws (M4)
→
Refer to
7-2 Dimensions
for mounting dimensions (p. 64).
Z4LB-A
jj
40V2/Z4LB-A
jj
40PV2 Sensors
There are two mounting holes, one on the right and one on the
left. Screw the holes to install and secure the emitter and the re-
ceiver. When installed, the head of screws should not enter the
beam.
Screws (M4)
→
Refer to
7-2 Dimensions
for mounting dimensions (p. 64).
Note
Do not disconnect the coupling bracket that connects the receiv-
er and the emitter, otherwise proper measurement will not be
possible.
2-5-2
Amplifiers
There are two mounting holes. Insert the screws into the holes to
install the Amplifier. The Amplifier can also be mounted to DIN
Track.
Screws (M4)
→
Refer to
7-2 Dimensions
for mounting dimensions (p. 64).