7
．
EtherCAT Connection Procedure
16
7
If the Alarm Dialog Box is
displayed, check the cable
connections and the
communications port No..
Check the contents and click the
OK
Button, then perform steps 8
to 9.
If the Alarm Dialog Box is not
displayed, steps 8 to 9 are
unnecessary.
Proceed to step 10.
8
Check the cable connections
and the communications port
No..
*Select Application from the
Setting Menu for the
communications port No..
The Setting of application
Dialog Box in step 5 is
displayed. Check the
communications port No. to
use.
9
Select
Check for connected
axes
–
Controller
from the
Setting Menu.
10
The Manual operation mode
Select Dialog Box is displayed.
Select
Teach 1 (Safety speed
effective/PIO start prohibition)
as the manual operation mode,
and click the
OK
Button.
Summary of Contents for SCON-CA
Page 40: ...2015 0115 1213 P585 E1 02 ...
