7
．
EtherCAT Connection Procedure
15
5
The Setting of application Dialog
Box is displayed only at the
initial start after the software has
been installed.
Select the communications port
No. to be used in the
Port
Field,
and click the
OK
Button.
*If there are multiple serial ports
on the Personal computer,
display the Windows Device
Manager. Then select the
same port as the
communications port No.
where the SCON-CA Controller
is connected under Ports
(COM & LPT) (COM6 in this
example).
*To display the
Device
Manager
, right-click My
Computer and click
Properties
from the Windows Menu. Then
click
Device Manager
in the
window that is displayed.
6
When the software starts,
the Check for connected axes
Dialog Box is displayed, and
then the SCON-CA Controller
goes online.
The connected axes check
performs to the final axis (the
figure on the right indicates Axis
No.: 15) when you go online.
Summary of Contents for SCON-CA
Page 40: ...2015 0115 1213 P585 E1 02 ...
