Omron PROFINET NX-PNC202, User Manual

Page: 267 / 282

13 - 7
13 Maintenance and Inspection
NX-series PROFINET Coupler Unit User’s Manual (W623)
13-2 M
aintenance Procedures
13
13-2-4 Using Settings from NX Units on Other Coupler Units
Additional Information
• Refer to the manual for the specific NX Unit for the procedures to mount and remove the NX
Unit.
• Refer to
Precautions for Safe Use
on page 16 for the procedures to disconnect and connect
the PROFINET Coupler Unit from and to the PROFINET network.
To mount and use NX Units that were set for one IO Device Terminal under a different PROFINET Cou-
pler Unit, you must export and import NX Unit settings.
To use the NX Unit settings on a different IO Device Terminal, you must export the NX Unit settings
from the Unit configuration of the set IO Device Terminal and then import the settings to the Unit config-
uration of the newly mounted IO Device Terminal.
Additional Information
• Refer to 9-2-5 Sysmac Studio Functions Used as Required on page 9-12 for information on
exporting and importing NX Unit settings.
• Some of the NX Unit settings are saved in the PROFINET Coupler Unit. Therefore, even if
you upload the NX Unit settings to an NX Unit that was set on a different IO Device Terminal,
the original NX Unit settings are not correctly applied to the newly mounted IO Device Termi-
nal. If you want to use the set NX Unit by mounting it to another IO Device Terminal, transfer
the Unit operation settings to the relevant NX Unit.
13-2-4 Using Settings from NX Units on Other Coupler Units