Omron PROFINET NX-PNC202, User Manual

Page: 152 / 282

7 Wiring
7 - 26
NX-series PROFINET Coupler Unit User’s Manual (W623)
7-3 Connecting USB Cable
The PROFINET Coupler Unit can be connected directly to a computer in which the Sysmac Studio is
installed through a USB cable.
Use a commercially available USB certified cable to connect the computer in which the Sysmac Studio
is installed to the peripheral USB port on the PROFINET Coupler Unit.
Use the following cable to connect the PROFINET Coupler Unit and the computer in which the Sysmac
Studio is installed.
To connect the PROFINET Coupler Unit to a computer with USB, you must first install a USB driver in
the computer.
When you install the Sysmac Studio, a USB driver for a USB connection will be automatically installed
in the computer.
When you turn ON the Unit power supply to the Profinet IO Device Terminal and connect the PROF-
INET Coupler Unit and computer with a USB cable, the computer will automatically recognize the
device and start installing the USB driver.
Connection Method
Connecting Cable
Unit port
Computer
port
Network type (com-
munications mode)
Model Length
Peripheral USB port (USB 2.0
compliant, B connector)
USB port USB 2.0
Commercially available
USB
certified cable (A
connector and B connec-
tor)
5 m max.
Preparations
Peripheral USB port
(USB 2.0 compliant, B connector)
Commercially available USB
certified cable
A connector
USB port
PROFINET
IO Device
B connector
Sysmac Studio