Omron PROFINET NX-PNC202, User Manual

Page: 233 / 282

12 - 9
12 Troubleshooting
NX-series PROFINET Coupler Unit User’s Manual (W623)
12-3 Checking for Errors and T
roubleshooting with Sysm
ac Studio
12
12-3-1 Checking Status with the PROFINET
Network
12-3 Checking for Errors and Trouble-
shooting with Sysmac Studio
Third party Support Software and Sysmac Studio can be used to check the status and errors for trou-
bleshooting hardware and network issues.
The following table provides a general description of the troubleshooting functions of each tool.
Refer to the operator manual of the PROFINET IO Controller for details on the status of the PROFINET
network.
Applicable Support Software Troubleshooting Function
Third party PROFINET IO Controller soft-
ware
•
Refer to the operator manual of the PROFINET IO Control-
ler for details on the status of the PROFINET network.
Sysmac Studio The following troubleshooting functions are available with the Sys-
mac Studio.
• Check errors managed by the PROFINET Coupler Unit
*1
• Check errors in the NX Units that are connected to the PROF-
INET Coupler Unit
*2
*1. You cannot check errors if there is a fatal error in the PROFINET Coupler Unit.
*2. On NX Units that manage their own errors, current errors cannot be checked after a fatal error occurs in that
NX Unit. On NX Units that record their own event logs, the error log cannot be checked after a fatal error oc-
curs in that NX Unit.
12-3-1 Checking Status with the PROFINET Network