Omron PROFINET NX-PNC202, User Manual

Page: 245 / 282

12 - 21
12 Troubleshooting
NX-series PROFINET Coupler Unit User’s Manual (W623)
12-3 Checking for Errors and T
roubleshooting with Sysm
ac Studio
12
12-3-4 Event Codes for Errors and
Troubleshooting Procedures
Event name Unit Configuration Verification Error Event code 35010000 hex
Meaning There is an inconsistency between the Unit configuration information in the Communication Coupler Unit
and the Units that are actually connected. Or, the Unit configuration was changed during operation while the
Unit configuration information was not set in the Communication Coupler Unit.
Source Build-in Ethernet port Source details Communica-
tions Coupler
Unit
Detection
timing
When power is
turned ON to
the Communi-
cations Cou-
pler Unit, when
the IO Device
Terminal is
restarted, or
during NX bus
communica-
tions
Error
attributes
Level Minor fault Recovery Cycle power to
the Communi-
cations Cou-
pler Unit or
restart the IO
Device Termi-
nal.
Log category System
Effects User program Continues. Operation When Fail-soft Operation Is Set to Fail-soft and
Fail-soft Operation Is Possible
• Communications Coupler Unit, NX Bus
IO refreshing for the NX Units that have a verifica-
tion error in the IO Device Terminal stops.
Messages cannot be sent to the NX Units that
have a verification error in the IO Device Terminal.
When Fail-soft Operation Is Set to Fail-soft and
Fail-soft Operation Is Not Possible
The operation is the same as when fail-soft opera-
tion is set to
Stop.
When Fail-soft Operation Is Set to Stop
• Communications Coupler Unit, PROFINET Com-
munications
Ethernet communications stops.
• Communications Coupler Unit, NX Bus
IO refreshing for the NX Units in the IO Device Ter-
minal stops.
Messages cannot be sent to the NX Units in the IO
Device Terminal.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---