Omron PROFINET NX-PNC202, User Manual

Page: 158 / 282

9 Setting Up the PROFINET Coupler Unit
9 - 2
NX-series PROFINET Coupler Unit User’s Manual (W623)
9-1 Settings and Setting Procedures
As examples, this section describes the PROFINET Coupler Unit setting items and procedure and the
settings that are required to access IO data in Profinet IO Devices from a third party PROFINET IO
Controller. For other settings and setting procedures, refer to the operation manual for the Sysmac Stu-
dio that you will use.
The settings that are used to access IO data in the IO PROFINET Coupler Unit from a third party
PROFINET IO Controller can be divided into two areas:
• NX-IO Units data
• PROFINET data
This data is set using Sysmac Studio.
This data is set using a configuration tool such as the OMRON Network Configurator.
9-1-1 Items to Set
NX-IO Units Data
Setting Description
Setting IO Device Terminal
Configuration and Operation
Settings
Adjust the settings of the IO Device Terminal with the configuration and opera-
tion settings of the NX Units and PROFINET Coupler Unit using
Sysmac Stu-
dio
.
PROFINET Data
Setting Description
Setting PROFINET IO Device
Name
Supported
Setting PROFINET IO Data Configure the Profinet IO Controller to connect to the PROFINET Coupler Unit
using a GSDML file.
Allocate the IO Data Allocate the IO Data to the IO Controller CPU's variables.