Omron PROFINET NX-PNC202, User Manual

Page: 208 / 282

11 PROFINET Coupler Unit Functions
11 - 16
NX-series PROFINET Coupler Unit User’s Manual (W623)
11-4 Clearing All Memory
This section describes how to clear all memory in the PROFINET Coupler Unit.
The clear all memory function of the Sysmac Studio initializes various setting information in the Profinet
IO Device Terminal to the default settings, such as the Unit configuration information and the IO alloca-
tion information.
You can use this function on the Sysmac Studio to initialize various setting information.
You can specify the scope of the memory to clear from the following.
• PROFINET Coupler and NX Units
• PROFINET Coupler Unit only
• NX Units only
• Event Logs
Additional Information
• Use the Sysmac Studio to clear the parameters of the connected NX Units.
• The Sysmac Studio can not clear all PROFINET parameters. Use the Network Configurator
to clear all PROFINET related parameters.
The function clears the following data in the Profinet IO Device Terminal.
11-4-1 Introduction
11-4-2 Details on Clearing All Memory
Specifying the Scope of Memory to Clear
Scope of Data to Clear and State of Memory After it is Cleared
Data
Status after Clear All Memory operation for each specification
Entire Profinet IO Device
Terminal
PROFINET Coupler Unit NX Unit
Unit configuration
information
This data is set to the default
settings.
If you turn ON the Unit power
supply immediately after the
Clear All Memory operation is
completed, the IO Device
Terminal starts based on the
actual Unit configuration
information.
The data is not cleared. The data is not cleared.
IO allocation
information
This data is set to the default
settings.
The data is not cleared. The data is not cleared.
Unit operation
settings
This data is set to the default
settings.
This data is set to the default
settings.
This data is set to the default
settings.