Omron PROFINET NX-PNC202, User Manual

Page: 255 / 282

12 - 31
12 Troubleshooting
NX-series PROFINET Coupler Unit User’s Manual (W623)
12-3 Checking for Errors and T
roubleshooting with Sysm
ac Studio
12
12-3-4 Event Codes for Errors and
Troubleshooting Procedures
Event name Memory All Cleared Event code 90430000 hex
Meaning The Unit settings were cleared.
Source Build-in Ethernet port Source details Communica-
tions Coupler
Unit
Detection
timing
When
commanded
from user
Error
attributes
Level Information Recovery --- Log category Access
Effects User program Continues. Operation The Unit settings were cleared.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The Clear All Memory operation
was executed.
--- ---
Attached
information
Attached information 1 and 3: Unit number of the NX Unit where the Clear All Memory operation was per-
formed. If the Clear All Memory operation was performed for the entire IO Device Terminal, the information
given will be 255.
Attached information 2 and 4: Execution results
0: Successful
1: Hardware error
2: Initialization failed
3: Initialization not possible
Precautions/
Remarks
Refer to the attached information for the results of the Clear All Memory operation.