Omron PROFINET NX-PNC202, User Manual

Page: 161 / 282

9 - 5
9 Setting Up the PROFINET Coupler Unit
NX-series PROFINET Coupler Unit User’s Manual (W623)
9-2 Setting IO Device T
erm
inal
Param
eters
9
9-2-1 Item
s to Set
9-2 Setting IO Device Terminal Parame-
ters
This section describes how to set the IO Device Terminal parameters with Support Software. The Sys-
mac Studio is used as an example.
For Support Software other than the Sysmac Studio, refer to the operation manual for the Support Soft-
ware that you are using.
The following settings must be adjusted in the IO Device Terminal.
Specify the NX Unit configuration information for the IO Device Terminal, which consists of a PROF-
INET Coupler Unit and NX Units.

PROFINET Coupler Unit
The PROFINET Coupler Unit settings are listed below.
You can set only the items that have “Yes” in the
Settable
column.
9-2-1 Items to Set
Name Description
Configura-
tion infor-
mation
IO Device Ter-
minal configura-
tion information
This information describes the configuration of the IO Device Terminal: the num-
ber and order of NX Units mounted after the PROFINET Coupler Unit, individual
NX Unit information, and information about the PROFINET Coupler Unit.
IO allocation
information
This information defines the IO data in the PROFINET Coupler Unit and the NX
Units.
IO Device Terminal operation
settings
The IO Device Terminal operation settings are for the PROFINET Coupler Unit
and the NX Units.
NX Unit application data This data controls the functionality that is specific to each NX Unit. Not all NX
Units have Unit application data.
9-2-2 Setting the NX Unit Configuration Information
Settings in the NX Unit Configuration Information
NX Units
NX Unit configuration information
PROFINET
Coupler Unit