Omron NJ501-5300, Instruction & Reference Manual, Page: 22 / 142

Versions
20 NJ/NY-series G code Instructions Reference Manual (O031)
 Checking the Unit Version of an EtherCAT Slave
You can use the Production Information while the Sysmac Studio is online to check the unit version
of an EtherCAT slave. Use the following procedure to check the unit version.
1
Double-click EtherCAT under Configurations and Setup in the Multiview Explorer. Or,
right-click EtherCAT under Configurations and Setup and select Edit from the menu.
The EtherCAT Tab Page is displayed.
2
Right-click the master on the EtherCAT Tab Page and select Display Production Information .
The Production Information Dialog Box is displayed.
The unit version is displayed after “Rev.”
 Changing Information Displayed in Production Information Dialog Box
1
Click the Show Detail or Show Outline Button at the lower right of the Production Informa-
tion Dialog Box.
The view will change between the production information details and outline.
Outline View Detail View