
19
Versions
NJ/NY-series G code Instructions Reference Manual (O031)
You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for Eth-
erCAT slaves.
Checking the Unit Version of an NJ-series CPU Unit
You can use the Production Information while the Sysmac Studio is online to check the unit version
of a Unit. You can do this for the CPU Unit, CJ-series Special I/O Units, and CJ-series CPU Bus
Units. You cannot check the unit versions of CJ-series Basic I/O Units with the Sysmac Studio.
Use the following procedure to check the unit version.
1
Double-click
CPU/Expansion Racks
under
Configurations and Setup
in the Multiview
Explorer. Or, right-click
CPU/Expansion Racks
under
Configurations and Setup
and select
Edit
from the menu.
The Unit Editor is displayed.
2
Right-click any open space in the Unit Editor and select
Production Information
.
The Production Information Dialog Box is displayed.
Checking the Unit Version of an NY-series Controller
You can use the Production Information while the Sysmac Studio is online to check the unit version
of a Unit. You can only do this for the Controller.
1
Right-click
CPU Rack
under
Configurations and Setup
-
CPU/Expansion Racks
in the Multi-
view Explorer and select
Production Information
.
The Production Information Dialog Box is displayed.
Changing Information Displayed in Production Information Dialog Box
1
Click the
Show Detail
or
Show Outline
Button at the lower right of the
Production Informa-
tion
Dialog Box.
The view will change between the production information details and outline.
The information that is displayed is different for the Outline View and Detail View. The Detail View
displays the unit version, hardware version, and software versions. The Outline View displays only
the unit version.
Note The hardware revision is separated by “/” and displayed on the right of the hardware version.
Checking Unit Versions with the Sysmac Studio
Outline View
Detail View
Summary of Contents for NJ501-5300
