Omron NJ501-5300, Instruction & Reference Manual, Page: 139 / 142

A - 3
Appendices
NJ/NY-series G code Instructions Reference Manual (O031)
A-
1 Program
Parsing
by CN
C Operato
r
A
A-1
-1 Inter
m
ediate co
de format
A space is inserted between words.
A block number is created as N + G-code line number before program parsing, regardless of its
description or not.
Any content described as a comment is ignored by intermediate codes.
M999.001 or M999.002 is inserted into the end of block.
These M codes are necessary for the NC Integrated Controller for program interpretation, and it is not
necessary for users be conscious about it. Therefore, waiting for an M code or resetting it is not
required.
“/” is replaced by “cskip”.
A pair of square brackets “[ ]” is replaced by a pair of parentheses “( )”.
Internal G-code G80.001 is inserted immediately before G74/G84 that starts the fixed cycle.
If M-code parameters VA to VH are given, code V is removed and it is replaced by A to H.
Between words
Block number
Comment
EOB (End of Block)
Optional Block Skip
Variable Indirection
G74/G84
M-code Parameters