![background image](http://html1.mh-extra.com/html/omron/ne1a-scpu01-07-2009/ne1a-scpu01-07-2009_operation-manual_742749185.webp)
150
Command Reference: Function Blocks
Section 6-5
6-5-9
Function Block: User Mode Switch
Diagram
Default Connections
General Description
The User Mode Switch function block is used to monitor an operating mode
switch in the user system or device.
The operating mode switch that can be connected with this function block
must be a 1-of-N type switch (i.e., one of N contacts is ON). The function
block supports a maximum of eight inputs and corresponding outputs.
The output corresponding to the input that is active is turned ON. If an error is
detected for the function block, however, all outputs will turn OFF.
Optional Output Settings
The number of I/O can be increased on the In/Out Setting Tab Page in the
function block property dialog box.
Fault Present Output Setting
Fault Present output can also be used in programming.
To enable this output, select the Fault Present checkbox on the In/Out Setting
Tab Page of the function block properties dialog box.
Maximum Number of Inputs for a User Mode Switch Logic Function
Parameter
Setting range
Default
setting
Number of
inputs
2 to 8
2
Number of
outputs
2 to 8
2
Summary of Contents for NE1A-SCPU01 - 07-2009
